K760 vs K770 — Pro Guide to the Current Lineup
Short version: The old Husqvarna K760 concrete saw has been discontinued and replaced by the Husqvarna K770. However, the K760 Cut-n-Break remains current — a unique deep-cut saw for concrete pros who need to reach up to 16" depth from one side. This guide compares every version, explains which one fits your job, and links directly to current bundles, parts, and pricing.
Jump to Models Compare Specs Which Saw for Which Job Current Offers
Context for Pros
- K760 (power cutter) → DISCONTINUED. The Husqvarna K770 is its modern successor — same job class, improved SmartTension™ system, and parts continuity.
- Husqvarna K760 Cut-n-Break → still current; a deep-cutting K760 Husqvarna concrete saw reaching ~16" from one side. Great for doorways, trench runs, and expansion joints.
- Husqvarna K770 lineup now includes specific variants for every job condition: Standard (14"), SmartGuard, Dry Cut (integrated dust collection), and Rescue.
Models & When to Use Them
K760 Cut-n-Break — Deep-Cut Method up to ~16"
Use for: Openings and deep wall cuts from one side — windows, doors, trench runs, and expansion joints. The K760 Husqvarna Cut-n-Break uses twin 9" blades that form a core, which you break out with the included tool, allowing progressive step-in cuts until you reach up to ~16" depth. Ideal for contractors needing deep cuts without overcutting corners.
Why pick it: Lowest blade cost per foot for deep cuts, excellent control, and the ability to finish from one side. Compatible Husqvarna K760 parts and accessories remain available.
Shop Husqvarna K760 Cut-n-Break (SKU 967195701)
Husqvarna K770 — Standard 14" Power Cutter (Replaces K760)
Use for: Everyday cut-off work in concrete, asphalt, block, and pavers. Wet cutting, 14" blade, ~5" max depth. Built with the SmartTension™ belt system for consistent torque and long life.
Why pick it: The K770 Husqvarna concrete saw is the true upgrade to the discontinued K760 Husqvarna concrete saw. It uses the same Husqvarna K760 blade size (14") and mounts the same blades, making it an easy swap for any pro crew.
Shop Husqvarna K770 (SKU 967682101)
Husqvarna K770 SmartGuard — 14" with Extended Guard (Kickback Control)
Use for: General concrete/asphalt cutting where operator safety and control matter. The SmartGuard extended guard helps guide proper cutting technique, reducing kickback risk and improving line-of-sight control. Same 14" blade and power as the standard K770 Husqvarna concrete saw.
Why pick it: Crews that train new operators or run long shifts — SmartGuard minimizes kickback and fatigue while maintaining pro-level speed and precision.
Shop Husqvarna K770 SmartGuard
Husqvarna K770 Dry Cut — 12" with Integrated Dust Extraction
Use for: Indoor or dust-sensitive jobs where water is restricted. The Dry Cut’s integrated fan housing pulls around 100 CFM into a reusable dust bag. Despite its 12" blade, it reaches ~4.8" depth, nearly matching a 14" wet saw.
Why pick it: Fast mobilization and cleaner cuts without water setup — ideal for indoor concrete cuts or when external vacuums aren’t practical.
Shop Husqvarna K770 Dry Cut
Husqvarna K770 Rescue — 12" (Emergency/Rescue Configuration)
Use for: Emergency response and rescue work. Engineered for maximum visibility, easy pull-starting, and rapid deployment through debris, smoke, or water spray. Not typically used for everyday cutting but shares components with the standard K770 Husqvarna saw.
Shop Husqvarna K770 Rescue (SKU 967809101)
Quick Comparison (What Changes on the Job)
| Model | Primary Use | Blade / Max Depth | Dust/Water | Why This One |
|---|---|---|---|---|
| K770 (Standard) | All-round cut-off: concrete, asphalt, block | 14" blade · ~5" depth | Wet (standard); SmartTension™ belt system | Direct upgrade from legacy K760; best general choice |
| K770 SmartGuard | Same as K770 with safety-forward guard | 14" · ~5" | Wet; extended SmartGuard encourages safe cutting zone | Reduce kickback scenarios; better guidance for newer hands |
| K770 Dry Cut | Dry cutting where water is limited | 12" · ~4.8" depth | Integrated dust extraction (bag) ~100 cfm | Cleaner, contained dust; faster mobilization indoors |
| K770 Rescue | Rescue operations | Typically 12" | Configured for visibility and rapid start | Purpose-built rescue package (not typical daily concrete) |
| K760 Cut-n-Break | Deep wall cuts, openings, long runs | Twin blades; step-in method to ~16" depth | Wet; low consumable cost per foot | Deep cuts from one side; tight control; minimal overcut |
K770 (Standard)
K770 SmartGuard
K770 Dry Cut
K770 Rescue
K760 Cut-n-Break
Which Saw Fits This Job?
- Slabs, curbs, pavers, asphalt, trench tops → K770 (Standard) or K770 SmartGuard.
- Water-restricted or indoor work → K770 Dry Cut (bagged extraction).
- Openings or deep wall cuts up to ~16" → K760 Cut-n-Break or K760 Husqvarna Cut and Break.
- Rescue operations → K770 Rescue (12").
- Already own an old K760 Husqvarna concrete saw → parts remain available; when ready, move to K770.
Current Offers & Bundles
K770 Power Cutter — Contractor Bundle
Includes: K770 + 14" diamond blade + PPE add-ons. Excellent setup for daily concrete/asphalt cutting. Compare K760 Husqvarna price history to today’s K770 value — better features, same class.
- Shop Husqvarna K770 (Standard)
- Shop Husqvarna K770 SmartGuard
- Shop Husqvarna K770 Dry Cut
- Shop Husqvarna K770 Rescue
- Shop Husqvarna K760 Cut-n-Break
Free shipping to most U.S. destinations. Sales tax applies in TX.
Service & Parts (Keep Downtime Off the Schedule)
- SmartTension™ belt system (K770) — longer belt/pulley life; quick checks.
- Husqvarna K760 parts remain widely available — belts, blades, guards, and filters.
- Both K760 Husqvarna saw and K770 share similar service kits for consistent maintenance.
- For the K760 Cut-n-Break, maintain water flow on the kerf and break at regular intervals for optimal cut quality.
